Chapter 6: Status, Fault And Srq Registers; General; Scpi Language; Scpi Register Tree - TDK-Lambda GH10-100 User Manual

CHAPTER 6:
6.1

General

This section describes various status errors (faults) and SRQ register structures. The registers can
be read or set via communication commands. Two individual sets of registers are managed, one
set for the SCPI language, another set for the GEN language.
6.2

SCPI Language

6.2.1

SCPI Register Tree

STATUS, FAULT AND SRQ REGISTERS
Figure 6–1: SCPI Register Tree Diagram
154