Table of Contents
Advertisement
SUPPLY CONFIGURATIONS
Local Control
LAN Remote Control
RS232, RS485, USB
or Option Control
Analog Control
INDICATORS
IP and MAC Address
Multi-drop Address
Link/Activity LED
Speed LED
LAN Status LED
Blink Identify
SECURITY
Web Page Password
Single Client Only
Block UDP Sockets
Disable VXI-11
Discovery
Disable Ping Server
Disable mDNS
4.7.2.2
LAN Command Speed
The following communication speeds are typical values only. In addition to the variability in the
LAN interface, there are timing variations within the controller and the network routing.
The following speed specifications are subject to change without notice.
•
VISA Drivers, Sockets, Web.
•
Typical Command or query speeds:
All commands and queries have a response time in the range of 5~30ms, depending on the
command and the amount of parameters sent/received. Refer to the notes for specific commands
which require longer process/transmission time.
Supply may be controlled from the Front Panel even if LAN is
monitoring
Supply may be controlled and monitored through LAN
LAN interface is disabled if the standard RS-232, RS-485, USB or
Optional communications are active
LAN may monitor supply while analog control is used
View addresses on Front Panel or communication
View RS-485 address on Front Panel
Indicates that connection is active. network packets are being
received/transmitted
Indicates the speed
Red/Green, indicates power supply has valid IP connection
Find the Master Supply by remotely blinking Front Panel and Rear
Panel LEDs
Can set password to prevent unauthorized or accidental changes
to LAN settings or power supply output settings
Set to prevent multiple programs from taking control
Single client will block attacks through UDP sockets
Stop power supply detection
Stop power supply detection
Stop power supply detection
59
Advertisement
Table of Contents
