Connect To A Network; Lan Cable; Types Of Networks - TDK-Lambda GH10-100 User Manual

Duplicate IP: Blinking green
•
If there are two (or more) instruments with the same IP address, green led is blinking.
• LAN Fault/Disconnected: Steady red
Shows that the LAN interface is not selected, LAN connection is disconnected or broken.
4.7.4

Connect to a Network

4.7.4.1

LAN Cable

The LAN cable must be supplied by the customer. One of the following cables can be used:
• A standard straight "patch" CAT-5 (or better) network cable.
• A "crossover" cable. The cable type is auto-detected by the power supply.
The serial link (RS-485) cable (0.5m long) provided with the
used for LAN connection.
4.7.4.2

Types of Networks

There are two types of networks discussed in this document:
• NETWORK WITH A DHCP SERVER
A typical local area network with a server computer and network administrator to keep it
operating. The server downloads the IP address and other settings to the power supply
NOTE
Figure 4–7: Network with a DHCP Server
61
power supply cannot be
.