Lineinfo Command; Lineperf Command - ZyXEL Communications IES-1000 User Manual

25.3.5 Enable Ports Command
Syntax:
192.168.1.1 gshdsl> enable ports
This command forcibly enables all G.SHDSL ports.
25.3.6

Lineinfo Command

Syntax:
192.168.1.1 gshdsl> lineinfo <port #>
where
<port #>
This command shows the line operating values of a G.SHDSL port.
An example is shown next.
192.168.1.1 gshdsl> lineinfo 2
2=Down Sp=0 Tx=0
where
<2=Down>
<Sp>
<Tx>
<Tr>
<Rx>
<Rr>
<NM>
<T>
25.3.7

Lineperf Command

Syntax:
192.168.1.1 gshdsl> lineperf <port #>
where
<port #>
This command shows the line performance counters of an G.SHDSL port
An example is shown next.
192.168.1.1 gshdsl> lineperf 7
Port=7 Sp=2048kbps NM=0db ATTEN=0db ES=0 SES=0 LOSWS=0 UAS=0 downN=0
G.SHDSL Commands
=
A port number, from 1 to 8
Tr=0
= The port number and whether the port is down/up (respectively).
= The line rate.
= The number of frames transmitted.
= The number of frames transmitted with errors.
= The number of frames received.
= The number of frames received with errors.
= The noise margin in decibels.
=
The uptime of a port in day:hour:minute format.
=
A port number, from 1 to 8
Rx=0 Rr=0
IES-1000 User's Guide
NM=0 T=000:00:00
25-3