LABEL
Reauthentication
Select (On) if a subscriber has to periodically re-enter his or her username and password to
stay connected to the port.
Reauthentication
Specify how often (60~65535 seconds) a subscriber has to re-enter his or her username and
Timer
password to stay connected to the port.
Apply
Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to the left to save your changes to the non-volatile memory when you are
done configuring.
Reset
Click Reset to begin configuring this screen afresh.
10.5.14
Fast Mode VLAN ID Setup Screen
Click Fast Mode VLAN ID in the Bridge Setup screen to open this screen.
The following table describes this screen.
LABEL
Bridge Setup
Click this link to go to the Bridge Setup screen.
Getting Started Screens
Table 10-17 Edit 802.1x Setup
Figure 10-21 Bridge Fast Mode VLAN ID Setup
Table 10-18 Bridge Fast Mode VLAN ID Setup
DESCRIPTION
DESCRIPTION
IES-1000 User's Guide
10-21