10/100M Fast Ethernet Port Commands; 10/100M Fast Ethernet Overview; Ethernet Commands; Set Auto Command - ZyXEL Communications IES-1000 User Manual

10/100M Fast Ethernet Port Commands

The Ethernet subsystem allows you to configure and monitor the 10/100M fast Ethernet port.
27.1

10/100M Fast Ethernet Overview

Refer to the web configurator chapter on the ADSL module ports for background information on the 10/100M
auto-sensing Ethernet ports.
27.2

Ethernet Commands

Use these commands to configure a network module's Ethernet port.
27.2.1

Set Auto Command

Syntax:
192.168.1.1 ethernet> set auto <on|off>
where
= on or off
<on|off>
This command sets the auto-negotiation of the Ethernet port to either on or off.
27.2.2

Set Duplex Command

Syntax:
192.168.1.1 ethernet> set duplex <mode>
where
= full or half
<mode>
This command sets the duplex mode used when auto-negotiation is turned off.
27.2.3

Set Speed Command

Syntax:
192.168.1.1 ethernet> set speed <speed>
where
10/100M Fast Ethernet Port Commands
IES-1000 User's Guide
Chapter 27
27-1