ZyXEL Communications IES-1000 User Manual page 192

MODULE
secured host
date
uptime
version
vlan1q
config
dvlan
svlan
vlan
Commands Introduction
Table 22-1 Commands
COMMAND
facility <facility>
server <ip>
enable | disable
add <hostIp>
delete <hostIp>
date [<YYYY>-<MM>-<DD>]
[<hh>:<mm>:<ss>]
save
list
reset
getentry <vid>
list
setentry <vid> <portNo>
setentry <vid> <portNo>
<ad_control>
setentry <vid> <portNo>
<ad_control> <tag_control>
setname <vid> <name>
delentry <vid>
getentry <vid>
getname <vid>
getnames
cpu [<vid>]
list
enable/disable
status
IES-1000 User's Guide
DESCRIPTION
Sets the syslog facility.
Sets the syslog server IP.
Shows the secured host.
Enables or disables checking for the
secured host.
Adds a secured host.
Deletes a secured host.
Sets or show the date and time.
Shows the system uptime.
Shows the system version information.
Saves the VLAN settings to nonvolatile
memory.
Shows the run-time VLAN settings.
Reloads the VLAN settings from
nonvolatile memory.
Shows the dynamic VLAN status for
the specified entry.
Shows all dynamic VLAN status.
Sets a static VLAN entry to normal
tagged.
Sets a static VLAN entry to
<ad_control> tagged.
Sets a static VLAN entry to
<ad_control> and tagged or untagged.
Sets a name of a specific static VLAN.
Deletes a static VLAN table entry.
Shows the static VLAN setting for the
specified entry.
Displays the name of a specific static
VLAN.
Displays the name of all static VLANs.
Registers the CPU port to the
specified VLAN ID (sets the
management VLAN).
Shows all static VLAN settings.
Enables or disables the VLAN.
Shows the VLAN's current status.
22-17