ZyXEL Communications IES-1000 User Manual page 182

MODULE
version
dhcprelay
add
config
delete
enable
disable
help
reset
pool
status
trace
untrace
version
relayinfo
dot1x
enable
disable
status
debug
port
Commands Introduction
Table 22-1 Commands
COMMAND
<process>
<process> <resource>
<process> <resource> <value>
<ip>
[<ip> | all]
enable
disable
status
add [<
info>]
[level]
enable <port>
IES-1000 User's Guide
DESCRIPTION
Shows the controlled resources in the
specified process.
Shows the value of the specified
resource in a process.
Sets the value of a process's resource.
Shows the configuration driver's
version information.
Adds a DHCP server to the relay's list.
Displays the list of DHCP servers to
relay between.
Deletes a DHCP server or all servers
from the relay's list.
Turns on DHCP relay.
Turns off DHCP relay.
Displays help on available commands.
Resets and restarts DHCP relay.
Shows the DHCP relay memory pool
status.
Shows whether or not DHCP relay is
activated.
Activates trace option(s).
Deactivates trace option(s)
Displays the DHCP software version.
Turns on the DHCP relay agent
information (Option 82) feature.
Turns off the DHCP relay agent
information (Option 82) feature.
Displays the current status of the
DHCP relay agent information (Option
82) feature.
Adds the specified information for the
relay agent.
Turns on 802.1X security.
Turns off 802.1X security.
Displays the 802.1X security status.
Turns the debug level on or off.
Enables 802.1X security on the
specified port.
22-7