ZyXEL Communications IES-1000 User Manual page 97

LABEL
Default Enter the IP address of the default-outgoing gateway in dotted decimal notation, for example
Gateway 192.168.1.254.
Apply Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000 loses
these changes if it is turned off or loses power, so use the Config Save link on the navigation
panel to the left to save your changes to the non-volatile memory when you are done configuring.
Reset Click Reset to begin configuring this screen afresh.
Getting Started Screens
Table 10-19 IP Setup
DESCRIPTION
IES-1000 User's Guide
10-23