30.1
IEEE 802.1X Overview
The IES-1000 supports IEEE 802.1X port-based authentication (refer to the web configurator part for background
information).
30.2
IEEE 802.1X Commands
Use these commands to configure the IEEE 802.1X feature.
30.2.1
Enable Command
Syntax:
192.168.1.1 dot1x> enable
This command turns on the IEEE 802.1X security feature.
30.2.2
Disable Command
Syntax:
192.168.1.1 dot1x> disable
This command turns off the IEEE 802.1X security feature.
30.2.3
Status Command
Syntax:
192.168.1.1 dot1x> status
This command displays the current status of the IEEE 802.1X security feature.
30.2.4
Debug Command
Syntax:
192.168.1.1 dot1x> debug [level]
IEEE 802.1X Commands
IEEE 802.1X Commands
This chapter describes how to use the dot1x commands.
IES-1000 User's Guide
Chapter 30
30-1