ZyXEL Communications IES-1000 User Manual page 276

Syntax:
192.168.
1.1 ip> enable [<if> [mtu <size> [<ip> [<ipmask>]]]
where
<i/f>
[mtu <size>] =
<ip>
<ipmask>
This command sets the Ethernet port's IP address, subnet mask and the largest packet size that this interface
sends.
IP Commands
= The name of an interface ("ether" for this device).
Maximum Transmit Unit. The maximum packet size that this interface is to
send.
= The IP address of the device's interface.
= The subnet mask of the device's IP address.
IES-1000 User's Guide
33-5