Figure 11-3 Adsl Add Profile; Table 11-4 Adsl Add Profile - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
ADSL Profile Add or Edit Screen
Click the Profile Setup link in the Port Setup screen to go to the Profile Setup screen.
Click the Add button in the Profile Setup screen to add a new profile or click the name of an existing profile to
edit the profile.
LABEL
Port Setup Click this link to go to the Port Setup screen.
Profile Name When editing a profile, this is the name of this profile. When adding a profile, type a name for
the profile.
Latency Mode This field sets the ADSL latency mode for the ports that use this profile.
Select fast mode to use no interleaving and have faster transmission (a "fast channel"). This
would be suitable if you have a good line where little error correction is necessary.
Select interleave mode to use interleave delay when transmission error correction (Reed-
Solomon) is necessary due to a less than ideal telephone line.
Up Stream The following parameters relate to upstream transmissions.
Max Rate (Kbps) Type a maximum upstream transfer rate for this profile. Speeds from 32 to 1024 (Kbps) are
supported. Configure the maximum upstream transfer rate to be less than the maximum
downstream transfer rate.
11-6

Figure 11-3 ADSL Add Profile

Table 11-4 ADSL Add Profile

DESCRIPTION
ADSL Module Port Setup