Table 22-1 Commands - ZyXEL Communications IES-1000 User Manual

MODULE
bridge
config
device
ethertype
filter
filterage
flush
info
interface
portfilter
status
igmpsnoop
Commands Introduction

Table 22-1 Commands

COMMAND
save
print
reset
add <edd | xport/[1..8]>
delete <edd | xport/[1..8]>
list
<port> <any | ip | pppoe>
<seconds>
<portNo>
files
info
stats
version
<srcPort> <all | destPorts>
flush
IES-1000 User's Guide
DESCRIPTION
Saves the bridge's run time
configuration to nonvolatile memory.
Shows the bridge's run time
configuration.
Reloads the bridge's run time
configuration from nonvolatile memory.
Shows the bridge settings.
Adds a bridge device.
Deletes a bridge device.
Displays the bridge devices.
Displays the types of packets that the
ports are set to forward.
Sets the type of packets that a port is
allowed forward.
Displays the filtering database.
Displays the filter age time.
Sets the filter age time.
Clears the filtering database for all
ports.
Clears the filtering database on an
individual port.
Shows bridge information.
Shows files opened by upper layer.
Shows ether-support driver
information.
Shows bridge upper interface
statistics.
Shows ether-support driver
information.
Displays ports to forward to.
Sets ports to forward to.
Displays bridge management
statistics.
Displays the multicast filtering
database.
Clears all stored IGMP snooping
records.
22-3