ZyXEL Communications IES-1000 User Manual page 188

MODULE
delete
show
Commands Introduction
Table 22-1 Commands
COMMAND
bondc <bond name> <port list>
or
bondc <mode> <bond name>
<group list>
bondr <bond name> <port list>
or
bondr <mode> <bond name>
<group list>
nwirec <mode>
<group#>
nwirer <mode>
<group#>
pvc <portNo> <muxMode> <txvpi>
<txvci> [<rxvpi> <rxvci>]
pvcs <muxMode> <txvpi> <txvci>
[<rxvpi> <rxvci>]
vcp <profile name> <encap>
<aal> <class> <pcr> <cdvt>
[<scr/mcr> <bt/nrm>]
profile <profile>
profiles
bond <bond name>
nwire <group name>
ch <port> <vpi> <vci>
chs [<start port> [<stop
port>]]
vcp <profile name>
vcps
profile <profile>
profiles
pvc <portNo>
pvcs
ch <port> <vpi> <vci>
Bonds the specified member list and
sets them to STU-C mode.
Bonds the specified member list and
sets them to STU-R mode.
<group name> Bundles the specified ports into an n-
wire group set to STU-C mode.
<group name> Bundles the specified ports into an n-
wire group set to STU-R mode.
Sets the PVC configuration to the
specified GSHDSL port.
Sets the PVC configuration to all
GSHDSL ports.
Creates a VC profile.
Deletes the specified profile.
Deletes all profiles except the DEFVAL
profile.
Deletes the specified bonding group.
Deletes the specified n-wire group.
Deletes the specified PVC channel.
Deletes all PVC channels for the
specified ports.
Deletes a specific VC profile.
Deletes all VC profiles except the
DEFVAL profile.
Shows the contents of the specified
profile.
Shows the contents of all profiles.
Shows the PVC configuration of the
specified GSHDSL ports.
Shows the PVC configuration of all
GSHDSL ports.
Shows the contents of the specified
PVC channel.
IES-1000 User's Guide
DESCRIPTION
22-13