List Ports Command - ZyXEL Communications IES-1000 User Manual

24.3.12

List Ports Command

Syntax:
192.168.1.1 adsl> list ports
The list ports command shows the configured maximum rates, modes and states of all ADSL ports.
24.3.13 Set Profile Command
Syntax:
192.168.1.1 adsl> set profile <name> [fast] <atur max rate > <atuc max rate>
[ldly <atur delay> <atuc delay>][<atur ...> <atuc ...>]
<atux ...> = <target margin> <min margin> <max margin> <min rate>
where
<name>
[fast]
<atur max rate>
<atuc max rate>
<atur delay>
<atuc delay>
<atur target margin> =
<atur min margin>
<atur max margin>
<atur min rate>
<atuc target margin> =
<atuc min margin>
<atuc max margin>
<atuc min rate>
ATU-C (atuc) stands for ADSL Termination Unit-Central and refers to downstream transmission and ATU-R
(atur) stands for ADSL Termination Unit-Remote and refers to upstream transmission.
ADSL Commands
= The name of the profile (up to 31 characters).
= This is optional to set this profile for fast latency mode Select fast
mode to use no interleaving and have faster transmission (a "fast
channel"). This would be suitable if you have a good line where little
error correction is necessary.
= The maximum ADSL upstream transmission rate.
= The maximum ADSL downstream transmission rate.
=
The upstream interleave latency delay (0..255) milliseconds.
=
The downstream interleave latency delay (0..255) milliseconds.
The upstream target ADSL signal/noise margin (0-31db).
= The upstream minimum acceptable ADSL signal/noise margin (0-
31db).
=
The upstream maximum acceptable ADSL signal/noise margin (0-
31db).
=
The upstream minimum ADSL transmission rate in Kbps.
The downstream target ADSL signal/noise margin (0-31db).
=
The downstream minimum acceptable ADSL signal/noise margin (0-
31db).
=
The downstream maximum acceptable ADSL signal/noise margin (0-
31db).
= The downstream minimum ADSL transmission rate in Kbps.
IES-1000 User's Guide
24-9