Configuration Backup/Restore; Configuration Files Of The Network Module; Configuration Backup; Configuration Restore - ZyXEL Communications IES-1000 User Manual

This chapter describes the process for backing up your user settings (configuration) from the network
The network modules use FTP for configuration backup/restore through their built-in FTP servers. You can use
any FTP client (for example,
35.1

Configuration Files of the Network Module

The network module uses configuration files to store the user's settings, so they can be applied the next time the
network module is booted. The network module has the following configuration file:
init = The system configuration file for the network module.
35.2

Configuration Backup

You can backup all or some configuration files from the network module to your computer. Backup the system
configuration by following the example shown next.
Connect to the network module with your favorite FTP client. The command for the network module is generally
C:\> ftp <network module IP address>
at the computer command prompt.
Enter the User name (just press [ENTER]).
User: <ENTER>
Enter the management password (1234 by default).
Password: 1234
230 Logged in
Get the configuration files from the network module
ftp> get init
Quit FTP.
ftp> quit
35.3

Configuration Restore

You can restore configuration files from your computer to the network module. Restore the system configuration
by following the example shown next.

Configuration Backup/Restore

Configuration Backup/Restore
module onto your computer and how to restore them to the network module.
ftp.exe in Windows) to backup/restore the network module's configuration.
IES-1000 User's Guide
Chapter 35
35-1