ZyXEL Communications IES-1000 User Manual page 180

MODULE
steal
version
bun
version
build
config
list
show
set
reset
list
show
ethernet
Commands Introduction
Table 22-1 Commands
COMMAND
<n>
<num>
<config_spec>
config
devices
ports
channels <portName>
all opened channels <portName>
spices
objects
system
device <deviceName>
port <portName>
channel <portName> <channelNo>
system
port <portName> / <attr> =
<value>
channel <portName> <channelNo>
/<attr> = <value>
port <portName>
classes
class <className>
filter
address <addr>
IES-1000 User's Guide
DESCRIPTION
Shows buffer <n> in the current buffer
pool.
Steals <num> buffers from the current
buffer pool.
Displays version information for the
buffer driver.
Displays the bun driver's version.
Shows information on the bun driver's
build.
Enters manual configuration request to
bun driver.
Shows all configuration requests.
Shows all registered bun device
drivers.
Shows all registered bun ports.
Shows all enabled channels on the
specified port.
Shows open channels on the specified
port.
Shows all available spices.
Shows all data objects.
Shows system attributes.
Shows device information for the
specified device.
Shows information for the specified
port.
Shows information on the specified
channel of the specified port.
Sets system attributes.
Sets a port attribute.
Sets a channel attribute.
Resets port hardware.
Displays available port classes.
Displays a class's members.
Shows the NP filter table.
Selects the PHY address in the SMI
bus.
22-5