Procedure To Connect To An MDF
Connect the RJ-11 connector end of a telephone wire to one of the USER ports on the AAM1008.
Step 1.
Connect the other end of the telephone wire to the upper ports of the MDF using a punch-down tool.
Step 2.
Connect the telephone wiring from each end-user's ADSL modem to the lower ports of the MDF.
Step 3.
6.4.3
Installation Scenario B
Phone service is available. There is one MDF from which end-users CO connections are made (see next figure).
Hardware Connections
Figure 6-7 Installation Scenario A
IES-1000 User's Guide
6-7