Bridge Overview; Bridge Setup Screen - ZyXEL Communications IES-1000 User Manual

IES-1000 User's Guide
LABEL
Slot ID Type 1 or 2 for the slot ID number. The slot ID helps keep track of this individual network
module.
Apply Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to the left to save your changes to the non-volatile memory when you are
done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
10.3

Bridge Overview

The IES-1000 supports IEEE 802.1D transparent bridging, but not the static filtering feature or spanning tree
protocol. The bridge learns the source MAC addresses of sender hosts by inspecting incoming Ethernet frames and
recording the learned MAC addresses with their incoming port numbers into its filtering database. Based on the
database, the bridge forwards each incoming frame to its destination port.
10.4

Bridge Setup Screen

Click Bridge Setup in the navigation panel to open this screen.
10-2
Table 10-1 General Setup
DESCRIPTION
Getting Started Screens