ZyXEL Communications IES-1000 User Manual page 185

IES-1000 User's Guide
MODULE
version
adsl
config
enable
disable
ldly
linedata
lineinfo
lineperf
linerate
set
22-10
Table 22-1 Commands
COMMAND
save
ch <port> <vpi> <vci>
chs [<start port> [<stop
port>]]
port <port>
ports
ch <port> <vpi> <vci>
chs [<start port> [<stop
port>]]
port <port>
ports
ldly <ports|port number>
[<downstream value> <upstream
value> <Symbol|MilliSec>]
<port>
<port>
<port>
<port>
ch <port> <vpi> <vci> <pvid>
<priority> <vcp name>
ch <port> <vpi> <vci> super
<vcp name>
profile <name> [fast] <atur max
rate> <atuc max rate> [ldly
<atur delay> <atuc delay>]
[<atur ...> <atuc ...>]
port <port> <profile> <mode>
ports <profile> <mode>
pvc <port> <muxMode> <txvpi>
<txvci> [<rxvpi> <rxvci>]
DESCRIPTION
Shows the version information of file
system.
The adsl commands apply to the AAM
module.
Saves configuration of the ADSL
module to nonvolatile memory.
Enables the specified PVC channel(s).
Enables all PVC channels for specific
ports.
Enables the specified ADSL port.
Enables all ADSL ports.
Disables the specified PVC
channel(s).
Disables all PVC channels for the
specified ports.
Disables the specified ADSL port.
Disables all ADSL ports.
Sets or displays the maximum line
delay.
Shows the line bit allocation of the
specified ADSL port.
Shows the line operating values of the
specified ADSL port.
Shows the line quality of the specified
ADSL port.
Shows the line rate parameters of the
specified ADSL port.
Creates a new PVC channel, or
modifies an existing one.
Creates a super channel, or modifies
an existing one.
Sets an ADSL line configuration
profile.
Applies a profile setting and
operational mode to an ADSL port.
Applies a profile setting and
operational mode to all ADSL ports.
Sets the PVC configuration to the
specified ADSL port.
Commands Introduction