LABEL
Channel Setup Click this link to go to the Channel Setup screen.
Profile Name
This name identifies the profile.
Encap.
This field displays the type of encapsulation (LLC or VC).
AAL
This field displays the ATM Adaptation Layer (AAL).
Class
This field displays the type of ATM traffic class: cbr (constant bit rate), rt-vbr (real-time variable bit
rate), nrt-vbr (non real-time variable bit rate), ubr (unspecified bit rate) or abr (available bit rate).
PCR
This is the Peak Cell Rate (PCR), the maximum rate at which the sender can send cells.
CDVT
This field displays the accepted tolerance of the difference between a cell's transfer delay and the
expected transfer delay.
SCR/MCR
The Sustained Cell Rate (SCR) sets the average cell rate (long-term) that can be transmitted. SCR
applies with the rt-vbr and nrt-vbr traffic classes.
Minimum Cell Rate (MCR) is the minimum rate at which the sender can send cells. MCR applies
with the abr traffic class.
BT/NRM
Burst Tolerance (BT) is the maximum number of cells that the port is guaranteed to handle without
any discards. BT applies with the rt-vbr and nrt-vbr traffic classes.
The Number of Resource Management (NRM) cells is the maximum number of cells a source may
send for each forward Resource Management cell. NRM applies with the abr traffic class.
Add
Click this button to configure a new VC profile.
Delete
Select a VC profile's Delete check box and click the Delete button to remove the VC profile.
Virtual Channel Management
Figure 13-4 DSL Port VC Profile Setup
Table 13-2 DSL Port VC Profile Setup
DESCRIPTION
IES-1000 User's Guide
13-7