ZyXEL Communications IES-1000 User Manual page 191

IES-1000 User's Guide
MODULE
version
isfs
trace
version
passwd
restart
snmp
access
trap
config
sys
info
set
errlog
syslog
22-16
Table 22-1 Commands
COMMAND
delete <netName>
flush
<level>
<read | write> <community>
[<ip>]
delete <community> [<ip>]
flush
list
add <community> <ip>
delete <community> <ip>
flush
list
save
name [<name>]
contact [<name>]
chassis <id>
location [<loc>]
mode <fast | normal>
slot <id>
clear
display
enable | disable
DESCRIPTION
Deletes a subnet.
Removes all subnets.
Shows the version information for the
IP module.
Shows the ISFS trace level.
Sets the ISFS trace level.
Shows version information for the
ISFS module.
Changes the management password.
Saves the configuration and restarts
the system.
Adds an SNMP access entry.
Deletes an SNMP access entry.
Deletes all SNMP access entries.
Lists all SNMP access entries.
Adds a trap destination.
Deletes a trap destination.
Deletes all trap destinations.
Lists all trap destinations.
Saves access entries and trap
destinations to the nonvolatile
memory.
Shows the system information.
Sets or clears the system name.
Sets the contact person's name.
Sets the chassis ID number.
Sets or clears the location.
Sets the bridge operation mode.
Sets the slot ID.
Clears the system error log.
Shows the system error log.
Shows the syslog setting.
Enables or disables the syslog.
Commands Introduction