Activate The Vdsl Current Port Profile; Reset Vdsl Profile; Band Plan; Figure 34-5 Reset Vdsl Profile - ZyXEL Communications Prestige 861H-G1 User Manual

Prestige 861H User's Guide
PARAMETER
encap This field displays the method of encapsulation used by your ISP. Choices vary
depending on the operating mode of each remote node.
If the operating mode is set as a bridge, this field displays either PPPoA or RFC
1483.
If the operating mode is set as routing, this field displays PPPoA, RFC 1483, ENET
ENCAP or PPPoE.
ip This field displays whether the remote node is configured as a router (IP) or as a
bridge (BDG).

34.6.4 Activate the VDSL Current Port Profile

Syntax:
vdsl profile actv
This command activates the VDSL current port profile.
It sends the current selected profile to the Prestige. It also sends system and port provisioning data
to the Prestige and then the Prestige will be informed to initiating the VDSL line.

34.6.5 Reset VDSL Profile

Syntax:
vdsl profile default
This command resets the VDSL profile to be the default settings, see Table 34-2 for more
information.
P861H> vdsl profile default
Profile reset OK!
P861H>

34.6.6 Band Plan

Each VDSL mode operates in a different frequency band allocation, resulting in different
upstream and downstream speeds. The following table summarizes frequency ranges for each
VDSL mode supported by the Prestige.
VDSL BAND PLAN
MODE
ANSI/ETSI 998-138-8500
Plan 998
998-138-12000
ETSI Plan 997-138-8500
997
998-137-4400
34-6
Table 34-5 PVC List

Figure 34-5 Reset VDSL Profile

Table 34-6 VDSL Mode and Frequency Ranges

UPSTREAM_1
0.138M ~ 3.75M
0.138M ~ 3.75M
0.138M ~ 3.00M
0.138M ~ 3.00M
DESCRIPTION
FREQ. RANGE (Hz)
DOWNSTREAM_1 UPSTREAM_1
3.75M ~ 5.20M 5.20M ~ 8.50M
3.75M ~ 5.20M 5.20M ~ 8.50M
3.00M ~ 5.10M 5.10M ~ 7.05M
3.00M ~ 4.40M
DOWNSTREAM_2
8.50M ~ 12.00M
7.05M ~ 8.50M
VDSL Commands