Loading Paper For Receiving Faxes; Receiving Automatically In Fax Mode - Muratec F-110 Operating Instructions Manual

All manuals and user guides at all-guides.com
The current reception mode is displayed when the machine is in Standby
mode.
JAN-04 15:30 FAX
If you seldom use the fax line for voice conversations, set your
machine to receive a fax automatically by selecting FAX mode.

Loading Paper for Receiving Faxes

The instructions for loading paper in the paper input tray are the same
whether you are printing, faxing, or copying, except that faxes can only
be printed on letter-, A4-, or legal-sized paper. See "Loading Paper" on
page 1.15 for instructions.
After loading paper for receiving faxes, set the paper size to the size of
paper you normally load in the paper input tray. The F-110 uses this
setting when printing reports and determining autoreduction for incoming
faxes. See page 3.3 to set the paper size.

Receiving Automatically in FAX Mode

The F-110 is preset to the FAX mode at the factory. If you have changed
the fax mode, take the following steps to receive faxes automatically:
1. Press and hold down RECEIVE MODE/CONTRAST on the front panel
repeatedly until the display shows 'FAX MODE'.
2. When you receive a call, the machine answers the call on a specified
number of rings and receives a fax automatically. To change the
number of rings. See 'Setting User-Selectable System Options' on
page 3.2.
To adjust the ringer volume, see 'Setting Volume' on
Current reception mode
page 3.1.
3.15
Stand-alone Fax