What If You Answer A Fax Call; Using A Phone Connected Directly To Your Fax Machine; Using A Phone Not Connected To Your Fax Machine; When The Paper Runs Out - Muratec MFX-1500 Operating Instructions Manual

What if you answer a fax call?

Using a phone connected directly to your fax machine

If you answer a directly connected phone and hear fax tones, simply press
hang up the handset. Your fax machine will go ahead and receive the fax call.

Using a phone not connected to your fax machine

Let's say you have another telephone connected to the same line ("branch
connected") as, but not physically to, your fax machine. If you answer a call on such
a phone and hear fax tones, here's what to do to receive the incoming fax:
1. Don't hang up the line! Instead, either:
• Put the telephone handset down (but – again – don't hang it up)
. . . or . . .
• If the telephone has a "hold" feature, put the phone on hold and then hang
up the handset.
2. Go to the fax machine.
3. Press / .
MONITOR CALL
4. Press .
START
5. Return to the telephone. If you didn't put the phone on hold in step 1, hang up
its handset.

When the paper runs out

Getting the word from your machine

and When your fax machine runs out of paper, the machine beeps, the
START
light glows and the display indicates the "Please Supply Paper" message.
Of course, your fax machine cannot print fax messages or copies without paper.
However . . .

Receiving when fresh out of paper

If your machine runs out of paper while you're away, it will store in memory up to
100 separate receptions (see the note, below). This is called out-of-paper reception.
Then, when you replenish the paper supply, the fax machine will print the stored
messages automatically! This is a great ease to your peace of mind, especially for
overnight and weekend sessions.
Note: How many pages (as opposed to receptions) your fax machine can store for
out-of-paper reception will vary. It depends upon not only your machine's
memory capacity but also the types of documents being sent, and the
resolution settings at which the documents are sent, to your machine.
Getting started
REPLACE PAPER
1.33