Easystart; Clearing Settings Before Beginning; Using Easystart To Enter Initial Settings - Muratec MFX-1500 Operating Instructions Manual

Getting started

EasyStart

Your Muratec fax machine comes with EasyStart. It guides you in entering the basic
settings required for normal operation — so it's easy for you to start using your
machine quickly. (Of course, you can make other settings later or change these
settings. We'll explain in "Beyond the basics," beginning on page 2.1.)

Clearing settings before beginning

Before using EasyStart, clear your machine's built-in user data memory, which
stores settings. This insures the memory will hold only your settings.
Important: After you use EasyStart, please do not clear the memory again unless
an authorized technician asks you to do so.
To clear the machine's memory:
1. Press to change the Fax mode. Then press
/
COPY FAX
The display now asks whether you're sure about clearing the memory:
Clear User Settings
Check Program/Enter
Note: If you don't want to proceed, just press
2.
If you are sure, press
ENTER
existing user data memory settings.
What do you want to do?
EasyStart will want you to enter a little information; so, first, please determine the
following before you proceed:
• The type of dialing your telephone system requires — You may select either
tone or pulse (rotary) dialing.
• The name and fax number you wish to appear on your faxes — Every fax
page you send will arrive at the receiving machine with a single line of text at the
very top of the page. Among other things, this text will list a name and a fax
number. The name must not be longer than 22 characters.
Note: Incidentally, the fax industry term for this text is Transmit Terminal
Identifier ( ). (Another term, Subscriber
TTI
number in the .)
TTI
1.18
, *, 2.
PROGRAM
.
PROGRAM
to complete the process by clearing the
, refers to just the fax
ID

Using EasyStart to enter initial settings

Important: Be sure your fax machine has paper before you begin EasyStart, since
this feature can print a handy settings list at the conclusion.
Important: If you press during EasyStart, your fax machine will return to
STOP
standby mode (its normal condition) but will retain what settings you
saved by pressing
ENTER
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
2. Press , (the letter "
PROGRAM I
The display will show the current setting of the fax's built-in
calendar/clock, with a cursor appearing under the first digit.
Enter Time
'01 01/01 00:00
3. Use the numeric keypad to enter the correct date and time, using a
format for the date and 24-hour format for the time. For instance, if it's
8:30 on March 10, 1998, press 9803102030, which results in:
PM
Enter Time
'98 03/10 20:30
Note: Your fax machine automatically inserts the spaces and date-slash.
All you have to do is enter the digits.
To change only one digit, press
move it rightward, to that digit. Then, enter the correct digit.
4.
Press to save the clock setting and continue EasyStart.
ENTER
as described in these instructions.
/ to change to Fax mode.
COPY FAX
," not the number "1"), .
I ENTER
to move the cursor leftward, or
YYMMDD
to