Receiving And Inspection; Nameplate Information; Model Explanation - Delta Electronics AC Motor Drive VFD-E User Manual

Chapter 1 Introduction|

1.1 Receiving and Inspection

This VFD-E AC motor drive has gone through rigorous quality control tests at the factory before
shipment. After receiving the AC motor drive, please check for the following:
Check to make sure that the package includes an AC motor drive, the User Manual/Quick
Start and CD.
Inspect the unit to assure it was not damaged during shipment.
Make sure that the part number indicated on the nameplate corresponds with the part
number of your order.

1.1.1 Nameplate Information

Example for 1HP/0.75kW 3-phase 230V AC motor drive
Output Frequency Range
Serial Number & Bar Code
Software Version

1.1.2 Model Explanation

VFD 007
1-2
AC Drive Model
Input Spec.
Output Spec.
Power Board
Control Board
23 A
E
Version Type
Mains Input Voltage
11:115 Single phase
23:230 Three phase
E Series
Applicable motor capacity
002: 0.25 HP(0.2kW)
004: 0.5 HP(0.4kW)
015: 2 HP(1.5kW)
022: 3 HP(2.2kW)
Series Name ( ariable requency
MODEL VFD007E23A :
INPUT :3PH 200-240V 50/60Hz 5.1A
OUTPUT :3PH 0-240V 4.2A 1.6kVA 0.75kW/1HP
FREQUENCY RANGE : 0.1~400Hz
007E23A0T5011230
01.03
02.03
A: Standard drive
C: CANopen
P: Cold plate drive (frame A only)
T: Frame A, built-in brake chopper
V
21:
V 43:460 Three phase
037: 5 HP(3.7kW)
055: 7.5 HP(5.5kW)
110: 15 HP(11kW)
V F
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
230V Single phase
V
D rive)