Appendix B Accessories|
B.8 KPE-LE02
B.8.1 Description of the Digital Keypad KPE-LE02
1
Status Display
1
Display the driver's current status.
2
LED Display
Indicates frequency, voltage, current, user
defined units and etc.
Potentiometer
3
For master Frequency setting.
4
RUN Key
Start AC drive operation.
Display Message
B-18
2
4
5
7
Displays the AC drive Master Frequency.
Displays the actual output frequency at terminals U/T1, V/T2, and W/T3.
User defined unit (where U = F x Pr.00.05)
Displays the output current at terminals U/T1, V/T2, and W/T3.
Displays the AC motor drive forward run status.
Displays the AC motor drive reverse run status.
The counter value (C).
Displays the selected parameter.
3
6
8
5
UP and DOWN Key
Set the parameter number and changes the
numerical data, such as Master Frequency.
6
MODE
Change between different display mode.
7
STOP/RESET
Stops AC drive operation and reset the drive
after fault occurred.
8
ENTER
Used to enter/modify programming
parameters
Descriptions
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11