1-15Hp/0.75-11Kw (Frame B&C) View; Internal Structure - Delta Electronics AC Motor Drive VFD-E User Manual

Chapter 1 Introduction|
1-15HP/0.75-11kW (Frame B&C)

Internal Structure

NOTE
The LED "READY" will light up after applying power. The light won't be off until the capacitors are
discharged to safe voltage levels after power off.
1-4
Input terminals cover
(R/L1, S/L2, T/L3)
Keypad cover
Case body
Control board cover
Output terminals cover
(U/T1, V/T2, W/T3)
READY: power indicator
RUN: status indicator
FAULT: fault indicator
1.
Switch to ON for 50Hz, refer to
P 01.00 to P01.02 for details
2.
Switch to ON for free run to stop
refer to P02.02
3. Switch to ON for setting frequency
source to ACI (P 02.00=2)
ACI terminal (ACI/AVI2 switch )
NPN/PNP
Mounting port for extension card
RS485 port (RJ-45)
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11