Delta Electronics AC Motor Drive VFD-E User Manual page 121

Chapter 4 Parameters|
For standard AC motor drive (without extension card), the multi-function output terminals are
falling-edge triggered and Pr.03.13 will display 3 (11) for no action.
For Example:
If Pr.03.13 displays 2, it means Relay 1 is active.
The display value 2 =bit 1 X 2
When extension card is installed, the number of the multi-function output terminals will
increase according to the extension card. The maximum number of the multi-function output
terminals is shown as follows.
4-68
Bit6: MO6/RA6 Status
Bit7: MO7/RA7 Status
Weights
Bit
1
Weights
Bit
7 6 5
0=Active
1=Off
1 0
Relay 1
MO1
0=Active
1=Off
4 3 2 1 0
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
Relay 1
MO1
MO2/RA2
MO3/RA3
MO4/RA4
MO5/RA5
MO6/RA6
MO7/RA7