Delta Electronics AC Motor Drive VFD-E User Manual page 196

Settings Function
Download/Execute/
24 Monitor PLC
Program (PLC2)
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
Description
When AC motor drive is in STOP mode and this function is
enabled, it will display PLC2 in the PLC page and you can
download/execute/monitor PLC. When this function is disabled, it
will display PLC0 in the PLC page and stop executing PLC
program. The motor will be stopped by Pr.02.02.
When operation command source is external terminal, the keypad
cannot be used to change PLC status. And this function will be
invalid when the AC Motor drive is in PLC1 status.
Chapter 4 Parameters|
4-143