Ping; Ip Address; Count; Size - ADTRAN ATLAS 800 PLUS User Manual

» Ping
»» IP Address
»» Count
»» Size
»» Timeout
»» Round trip min
»» Round trip avg
»» Round trip max
»» Tx Stats
»» Reset Stats
»» Start/Stop
61200226L1-1
Write security: 5; Read security: 5
Allows you to send pings (ICMP requests) to devices accessible via the net-
work.
Only ping one session can be active at a time.
Write security: 5; Read security: 5
Specifies the IP address to ping.
Write security: 5; Read security: 5
Specifies the number of pings to send. The default number is, and the maxi-
mum value is 99.
Write security: 5; Read security: 5
Specifies the size in bytes of the data portion of the ping request. The
default value is 64 bytes, and the maximum size is 1024 bytes.
Write security: 5; Read security: 5
Specifies the time in milliseconds to wait for the ping reply before timing
out. The default timeout is three seconds, and the maximum timeout value
is ten seconds.
Read security: 5
Displays the minimum round trip time of the ping request/reply of the cur-
rent set of pings.
Read security: 5
Displays the average round trip time of the ping request/reply of the cur-
rent set of pings.
Read security: 5
Displays the maximum round trip time of the ping request/reply of the cur-
rent set of pings.
Read security: 5
Displays the number of ping requests transmitted ( n txed ), the number of
ping replies received ( n rxed ) and the number of ping requests that were
lost ( n lost ).
Write security: 5; Read security: 5
Resets all ping statistics to zero. If the ping client is active, this menu will
stop it.
Write security: 5; Read security: 5
If the ping client is currently idle, this menu sends pings to the specified
address. If the ping client is active, the menu sends stops sending pings.
PLUS
ATLAS 800
Chapter 6. Terminal Menu and System Control
User Manual 6-19