Network Connection; Connection; Table 2-3. Network Pinout - ADTRAN ATLAS 800 PLUS User Manual

Chapter 2. Installing the ATLAS 800PLUS

Network Connection

Connection

2-6
Table 2-2. Control/Chain Out Pinout (Continued)
PIN NAME
5 RX DATA Data received from chained units by the ATLAS.
Connect to TX DATA of the next unit (Chain In pin 5).
6,7,8 UNUSED —
The two eight-pin modular jacks labeled NTWK 1 and NTWK 2 provide the
network connection. The two Network Interface (NI) ports comply with the
applicable ANSI and AT&T
tions:
• AMI or B8ZS coding
• Manual line build out
• D4 or ESF framing
• Network performance monitoring and reporting
• Test loopbacks with QRSS generation and checking
• Extensive self-testing
The network connection follows, with the pinout shown in Table 2-3 on page
2-6.
Connector type (USOC) RJ-48C
Part number AMP# 555164-2
PIN
1 R1 RXDATA-RING
2 T1 RXDATA-TIP
3 UNUSED
4 R TXDATA-RING
5 T TXDATA-TIP
6, 7, 8 UNUSED
PLUS
ATLAS 800
DESCRIPTION
®
standards. The NIs provide the following func-

Table 2-3. Network Pinout

NAME
Receive data from the network
Receive data from the network
—
Send data toward the network
Send data toward the network
—
User Manual
DESCRIPTION
61200226L1-1