Table of Contents
Advertisement
61200226L1-1
The Frame Relay/Router upgrade option adds the capability for the ATLAS
series of Integrated Access Devices to act as a voice/data FRAD, a frame re-
lay switch, and an IP router in addition to the current available bandwidth
manager and switch applications.
Dedicated and Switched Connection Maps in a Single Platform
PLUS
The ATLAS 800
allocates dedicated bandwidth according to any of up
to five unique connection maps. Any DS0 on any T1 circuit can be mapped
to any other DS0 on up to 34 T1 circuits in the system. Dedicated Connection
Maps can be invoked manually or implemented automatically based on the
time of day and day of the week.
Additionally, the ATLAS 800
specific ports or DS0s based on the number that is dialed. Switched connec-
tion mapping is supported for dial calls placed over basic rate ISDN, prima-
ry rate ISDN, or channelized T1.
Signaling Conversion for Maximum Interoperability
PLUS
The ATLAS 800
can convert between Robbed Bit Signaling and ISDN
D channel signaling, giving you the flexibility to get the speed and reliability
of ISDN, while preserving your investment in non-ISDN equipment. AT-
LAS can also convert between D4 and ESF frame formats as well as AMI and
B8ZS line coding, providing interoperability with legacy equipment.
Flexible Network Management and Maintainability
Several network management methods are available for the
PLUS
ATLAS 800
, including SNMP support. VT 100 and Telnet are also of-
PLUS
ATLAS 800
Chapter 1. Introducing the ATLAS 800PLUS
Frac T1
Frame
Relay
Figure 1-2. Frame Relay Circuit
PLUS
can be configured to switch dialup calls to
User Manual
1-3
Advertisement
Table of Contents
