Update Status; Config Transfer; Transfer Method; Tftp Server Ip Address - ADTRAN ATLAS 800 PLUS User Manual

Chapter 6. Terminal Menu and System Control
» Update Status
» Config Transfer
»» Transfer Method
»» TFTP Server IP
Address
»» TFTP Server
Filename
»» Current Transfer
Status
»» Previous Transfer
Status
6-16
on how to do this). For TFTP updates, you can cancel the process by select-
ing Cancel Update from this field.
Read security: 5
Displays the status of the current firmware update. These fields are identi-
cal to those defined in Current Update Status on page 6-15.
Write security: 3; Read security: 5
Used only with TFTP transfers. Sends a file containing the ATLAS 800
configuration to a file on a TFTP server using the TFTP protocol through the
10BaseT Ethernet port. Config Transfer also lets you save the
PLUS
ATLAS 800 configuration as a backup file, so you can use the same con-
figuration with multiple ATLAS 800
fer can retrieve a configuration file from a TFTP server.
To support these transfers, ADTRAN delivers a TFTP program with
PLUS
ATLAS 800 called TFTP Server. You can configure any PC running Mi-
crosoft Windows with this software, and store a configuration file. See TFTP
Server on page 13-10 for details on how to use TFTP Server.
Before using Config Transfer , the ATLAS 800
valid IP address, subnet mask, and default gateway (if required), and
should be connected to an Ethernet network.
Only one configuration transfer session (upload or download) can be active
at a time. The TCP/IP parameters are not saved or overwritten as part of an
PLUS
ATLAS 800 unit's transferred configuration; this way, identical config-
urations can be sent to multiple units.
Write security: 3; Read security: 5
Displays the method used to transfer the configuration file to or from a
server. Currently, you must use TFTP.
Write security: 3; Read security: 5
Specifies the IP address of the TFTP server. Get this number from your sys-
tem administrator.
Write security: 3; Read security: 5
Defines the name of the configuration file that you transfer to or retrieve
from the TFTP server. The default name is
name.
Read security: 5
Indicates the current status of the update.
Read security: 5
Indicates the status of the previous update.
PLUS
ATLAS 800
PLUS
units. In addition, Config Trans-
atlas.cfg
User Manual
PLUS
PLUS
should have a
, but you can edit this
61200226L1-1