Table of Contents
Advertisement
Chapter 13. ADTRAN Utilities
HELP
>
» Contents
» About
STATUS FIELD
METER FIELD
LOG FIELD
Saving the Current Configuration to a TFTP Server
13-12
Provides on-line help and version information.
Opens on-line help.
Displays version and owner information.
This field displays general information about port and transfer status. This
field is read-only. The unlabeled field in the center of the screen displays
prompts about the status of active transfers, such as bytes transferred and re-
ceived.
The XMIT meter provides a visual record of the transfer process.
This field displays a record of all of the events that occur during the time the
TFTP Server is enabled. Use the scroll bar to move up and down the list. To
clear the information in this field, from the Print Log menu, select Clear
Log . Save this information to a file before deleting it with the ...to Clipboard
command.
Before trying to save a configuration, ensure that the TFTP server is running.
If you are using the ADTRAN TFTP Server program, the server automatical-
ly enables when you start the program. Also, please note the following:
•
A level 3 or better password is required for a configuration download—
the same level required to modify most configuration parameters.
Please consult the ATLAS administrator if level 3 access is not available.
•
Some TFTP servers constrain filename formats. For example, a TFTP
server running on a PC under any platform may only permit 8.3 format
filenames (8 characters, period, and three extender characters).
PLUS
ATLAS 800
User Manual
61200226L1-1
Advertisement
Table of Contents
