Table of Contents
Advertisement
Chapter 10. Dial Plan Terminal Menu
»» Number of DS0s
»» Outgoing Number
Conversion
»» Strip MSD
»» Netwrk Spec. Fac. -
Voice
»» Netwrk Spec. - Fac.
Data
»» Called Digits
Transferred
10-10
Write Security: 3 Read Security: 5
Defines the number of DS0s used for calls on this PRI. DS0 24 is assumed to
be used by the PRI for the D channel.
Write Security: 3 Read Security: 5
This item defines the rules for converting as-dialed numbers into ISDN
number type and plan.
As dialed
ISDN -
National pref
ISDN -
Subscriber pref
ISDN - National DMS
Reserved pref
When a 4ESS is configured, many installations will require the
national form where possible; this may also be the preferred form in
10-digit calling areas.
Write Security: 3 Read Security: 5
Strips a selected quantity of the Most Significant Digits (MSD) of a dialed
number prior to being forwarded out of the port. For example, a Network
port set to accept all calls beginning with 9 (9$), and with Strip MSD set to
1, would send all digits toward the Network except the leading 9.
Strip MSD does not affect the Call Accept criteria. All of the
digits (including the MSDs that are subsequently stripped) are
used as accept criteria.
Write Security: 3 Read Security: 5
(Network Specific Facility - Voice) Defines specific facility IEs to send to the
Network. Use this option if the customer has subscribed to a network spe-
cific facility service such as AT&T Megacom service. The facility request
sent can be different for voice calls versus data calls. A setting of
indicates no special facilities have been subscribed.
Write Security: 3 Read Security: 5
(Network Specific Facility - Data) Defines specific facility IEs to send to the
Network. Use this option if the customer has subscribed to a network spe-
cific facility service such as AT&T Megacom service. The facility request
sent can be different for voice calls versus data calls. A setting of
indicates no special facilities have been subscribed.
Write security: 2; Read security: 5
Some PRI switches may be provisioned to only send a portion of the called
number (like DID). This menu item allows ATLAS to know how many dig-
its to expect (choose from
PLUS
ATLAS 800
Send digits provided as unknown number type.
Convert to ISDN type, using the 10-digit national
form if possible.
Convert to ISDN type, using the 7-digit subscrib-
er form if possible.
Send digits provided as National Number Type,
DMS Reserved Numbering Plan.
and
None, Three, Four,
User Manual
Normal
Normal
). The default is All and
All
61200226L1-1
Advertisement
Table of Contents
