Chapter 5. Navigating the Terminal Menu
Move to the bottom of a screen.
Ascend one menu level.
Session Management Keystrokes
To do this...
Log out of a session.
Invalidate the password entry and return to the login screen.
Refresh the screen.
To save time, only the portion of the screen that has changed is refreshed.
This option should only be necessary if the display picks up incorrect
characters.
The System Status bar can toggle to a full view of the current value
highlighted by the cursor.
and the System Status view.
While in the extended data mode, if the cursor highlights an element with
no useful information, the System Status is displayed.
Configuration Keystrokes
To do this...
Restore factory default settings.
This setting restores the factory defaults based on the location of the
cursor. If the cursor is on a module line (in the Modules menu), then
only the selected module is updated to factory defaults.
Copy selected items to the clipboard.
The amount of information you can copy depends on the cursor location
when you press
•
If the cursor is over an editable field, only that item is copied.
If the cursor is over the index number of a list, then all of the items in
•
the row of the list are copied. For example, if the cursor is over the
Slot #
with the slot is copied.
5-4
toggles between the extended data view
Ctrl-V
:
C
field in the
Modules
screen, all of the information associated
PLUS
ATLAS 800
User Manual
Z
Backspace
Press this...
Ctrl-L
Ctrl-S
Ctrl-R
Ctrl-V
Press this key...
F
C
61200226L1-1