Using T-Watch Pro - ADTRAN ATLAS 800 PLUS User Manual

Using T-Watch PRO

61200226L1-1
Instructions for Setting Up an ATLAS 800 for VT-100 Terminal Mode
Step
1
Set the baud rate on the VT-100 terminal to 9600 baud (8/N/1).
Use the Front Panel to set the ATLAS 800
2
match the terminal baud rate. Select 2) CONFIG, S0) SYSTEM,
2) CHAIN PORT, then 1) BAUD RATE .
Use the ADTRAN-provided VT-100 terminal adapter to connect
the COM port of a VT-100 compatible terminal, or equivalent, to
3 the eight-pin modular jack labeled CONTROL on the rear of the
unit. This connection provides both local and remote
configuration.
Repeatedly press Enter on the Front Panel until the Login Menu
4
appears.
After connecting a VT-100 terminal or a computer running VT-100 terminal-
emulation software to this port, you may need to press Ctrl-R to refresh the
display.
When you begin the VT-100 session, you will be prompted for a password.
The default password is password (which is a Level 0 superuser password).
You can change this password using the Access Passwords option, which
is only accessible through the terminal menu. See Access Passwords on page
6-11 for details.
T-Watch PRO is the ADTRAN Microsoft Windows management software
program designed to control TSU units from a remote PC. It provides limit-
ed control over the configuration of the ATLAS 800
terface. Currently, you can choose ATLAS 800
and T-Watch PRO automatically initiates a Telnet session by which you can
connect to and manage the ATLAS 800
T-Watch PRO automatically receives SNMP traps from an ATLAS 800
PLUS
ATLAS 800
Chapter 3. Operating the ATLAS 800PLUS
Action
PLUS
PLUS
Base Unit. Currently,
User Manual
PLUS
baud rate to
PLUS
using a graphic in-
from a list of products,
PLUS
.
3-5