Upgrading To 4X Pcie 2.5-Inch Ssd Configuration - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
Concluding steps
▶ Install the HDD fan modules, see
HDD variant)" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see "Using the Chassis ID Prom Tool" on page
corresponding system name.
▶
"Switching on the server" on page
▶
"Performing a RAID array rebuild" on page
7.5.9

Upgrading to 4x PCIe 2.5-inch SSD configuration

A PCIe backplane can only be installed as the first backplane.
A PCIe SSD backplane needs a PRAID EP5x0i or PRAID EP6x0i, see
"Example PRAID EP5xxi" on page
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
CAUTION
All data on all HDDs in the array will be lost when deleting the RAID
array!
▶
Be sure to back up your data before deleting a RAID array.
▶
For more information, see the "ServerView Suite RAID
Management" user guide.
After installing or removing an additional backplane, never forget to
change the system information using the Chassis ID Prom Tool.
168
"Installing the HDD fan module (2.5-inch
68.
54.
57.
60.
198.
Upgrade and Maintenance Manual
96. Select the
92.
Hardware: 10 minutes
TX1320 M5