Upgrading Configuration From Up To Four To Up To Eight 2.5-Inch Hdds/Ssds; Preliminary Steps; Removing The Odd Lock - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.2.11 Upgrading configuration from up to four to up to
eight 2.5-inch HDDs/SSDs
Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
All data on all HDDs/SSDs in the array will be lost when deleting the
RAID array! Be sure to back up your data before deleting a RAID array.
For further information, please refer to the "ServerView Suite RAID
Management" user guide.

7.2.11.1 Preliminary steps

"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê

7.2.11.2 Removing the ODD lock

Ê If an ODD has been installed, remove the ODD as described in section
"Removing the ODD" on page
Figure 83: Removing the ODD lock (A)
Ê Push the ODD lock in direction of the arrow.
164
252.
Upgrade and Maintenance Manual
Hardware: 10 minutes
RX1330 M3