Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 328

System board and components
Replacing the M.2 SSD
▶ Remove the defective M.2 SSD, see
▶ Install the new M.2 SSD, see
Concluding steps
▶ If applicable, install the NVMe cables from the PCIe backplane, see
Figure 85.
▶ If applicable, install the HDD fan module (2.5-inch HDD variant), see
"Installing the HDD fan module (2.5-inch HDD variant)" on page
▶ If applicable, install an expansion card, see
page 195.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
Software configuration
To install the ESXi to the M.2 SSD, see
page 323.
328
"Removing an M.2 SSD" on page
"Installing an M.2 SSD" on page
54.
57.
60.
Upgrade and Maintenance Manual
"Installing expansion cards" on
"Software configuration" on
324.
319.
68.
TX1320 M5