Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 340

System board and components
▶ Remove the HDD fan module(s), see
inch HDD variant)" on page 64
HDD variant)" on page
▶ Remove the following components from the system board:
▶ Heat sink, see
"Removing the performance heat sink" on page
Leave the CPU on the defective board for now.
▶ Memory modules, see
Ensure to take note of the memory modules' mounting positions for
reassembly.
▶ Expansion cards, see
Ensure to take note of the controllers' mounting positions and
cable connections for reassembly.
▶ If applicable, iRMC microSD card, see
card" on page
▶ If applicable, M.2 SSD, see
▶ If applicable, Dual microSD 64 GB Enterprise, see
microSD 64GB Enterprise" on page
Removing the defective system board
▶ Disconnect all cables from the system board.
▶ If applicable, remove all HDD modules, see
modules" on page
▶ If applicable, remove the HDD cage, see
cage" on page
▶ If applicable, remove the RDX drive, see
page 261.
▶ If applicable, remove the power distribution board, see
defective power distribution board" on page
340
or
67.
"Removing the standard heat sink" on page 231
"Removing memory modules" on page
"Removing expansion cards" on page
315.
"Removing an M.2 SSD" on page
154.
60.
Upgrade and Maintenance Manual
"Removing the HDD fan module (3.5-
"Removing the HDD fan module (2.5-inch
232.
"Removing the iRMC microSD
332.
"Removing 2.5-inch HDD/SSD
"Removing the 2.5-inch HDD
"Removing the RDX drive" on
124.
or
226.
203.
324.
"Removing the Dual
"Removing the
TX1320 M5