Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 140

Hard disk drive (HDD) / solid state drive (SSD)
▶ Insert the first HDD module into the HDD cage in HDD bay 0 and carefully
push back as far as it will go.
▶ Fasten the knurled screws (see circles, 1).
▶ If applicable, proceed with the second HDD module in HDD bay 1 in the
same way.
▶ Fasten the two knurled screws (see circles, 2).
Figure 64: Connecting the 3.5-inch non hot-plug HDD(s)
▶ Connect the cable to HDD 0 or HDD 1:
1 Power cable connector to HDD 0
2 SATA cable connector to HDD 0.
3 If applicable, power cable connector to HDD 1.
4 If applicable, SATA cable connector to HDD 1.
140 Upgrade and Maintenance Manual
HDD 0
HDD 1
TX1320 M5