Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 344

System board and components
▶ If applicable, install the RDX drive, see
page 259.
Concluding steps
▶ Connect all cables to the system board.
For the cable plan, see
▶ Install all remaining system board components as shown in the related
sections:
▶ If applicable, iRMC microSD card, see
card" on page
▶ If applicable, M.2 SSD, see
▶ If applicable, Dual microSD 64 GB Enterprise, see
microSD 64GB Enterprise" on page
▶ Memory modules, see
Ensure that you reinstall each memory module in the slot it was
located before the replacement.
▶ Expansion cards, see
Ensure that you reinstall each card in the slots it was located
before the replacement.
▶ Install the corresponding HDD fan module(s), see
module (2.5-inch HDD variant)" on page 68
module (3.5-inch HDD variant)" on page
▶
"Reassembling" on page
▶ Connect all external cables.
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
344
"Appendix B" on page
313.
"Installing an M.2 SSD" on page
"Installing a memory module" on page
"Expansion cards and backup units" on page
54.
60.
Upgrade and Maintenance Manual
"Installing the RDX drive" on
375.
"Installing the iRMC microSD
"Installing the Dual
329.
"Installing the HDD fan
or "Installing the HDD fan
65.
57.
319.
224.
181.
TX1320 M5