Power supply unit (PSU)
Installing the PSU dummy cover
Figure 46: Installing the PSU dummy cover
▶ Insert the dummy cover into the empty bay with the impressed arrow symbol
facing to the left (see circle).
▶ Push the dummy cover into its bay until it locks in place.
CAUTION
▶
Always install dummy covers into unused bays to comply with
applicable EMC regulations and satisfy cooling requirements.
Concluding steps
No steps needed.
6.4.3
Replacing a hot-plug PSU
Customer Replaceable
Unit (CRU)
Tools:
tool-less
122
Upgrade and Maintenance Manual
Hardware: 5 minutes
TX1320 M5