▶ Connect the cables to the RDX drive:
1 Power cable connector "RDX" to the connector on the RDX drive
2 USB cable to the RDX drive and to the connector "USB8" on the
system board
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
For the cable plan, see
12.4.2
Removing the RDX drive
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Removing backup and optical disk media" on page
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
TX1320 M5
54.
57.
60.
"Appendix B" on page
45.
Upgrade and Maintenance Manual
Accessible drives
91.
375.
Hardware: 10 minutes
74.
71.
46.
48.
261