Concluding steps
▶ If applicable, install the NVMe cables from the PCIe backplane, see
Figure
85.
▶ If applicable, install the HDD fan module (2.5-inch HDD variant), see
"Installing the HDD fan module (2.5-inch HDD variant)" on page
▶ If applicable, install an expansion card, see
page
195.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
17.6.4
Replacing an M.2 SSD
Upgrade and Repair Unit
(URU)
Tools:
tool-less
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If applicable, remove an expansion card, see
on page
203.
▶ If applicable, remove the HDD fan module (2.5-inch HDD variant), see
"Removing the HDD fan module (2.5-inch HDD variant)" on page
▶ If applicable, remove the NVMe cables from the PCIe backplane, see
Figure
84.
TX1320 M5
54.
57.
60.
45.
Upgrade and Maintenance Manual
System board and components
"Installing expansion cards" on
Hardware: 5 minutes
Software: 15 minutes
43.
46.
48.
"Removing expansion cards"
68.
67.
327