Installing the expansion card
▶ Remove the expansion card from its protective packaging.
For further instructions regarding controller settings, see the
accompanying documentation.
▶ If applicable, install the required slot bracket to the expansion card, see
"Installing a slot bracket" on page
▶ If applicable, connect internal cables to the expansion card.
For the cable plan, see
Figure 110: Installing the expansion card
▶ Carefully insert the expansion card into the selected PCIe slot and press
down firmly until it is fully seated in the slot.
▶ If applicable, install an additional screw to fix the expansion card firmly (see
close-up).
▶ Fold down slot cover clamp until it locks in place.
TX1320 M5
Expansion cards and backup units
184.
"Appendix B" on page
Upgrade and Maintenance Manual
375.
197