Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 115

Figure 40: Connecting cables
▶ Connect the cables to the system board:
1 PSU power cable to connector "PWR1"
2 PSU signal cable to connector "P30"
For the cable plan, see
Installing a hot-plug PSU and a PSU dummy cover
▶ Install the hot-plug PSU(s), see
The PSU must be installed in the first bay. The dummy cover must be
installed in the second bay.
▶ Install the dummy cover, see
page 122.
TX1320 M5
"Appendix B" on page
"Installing the PSU" on page
"Installing the PSU dummy cover" on
Upgrade and Maintenance Manual
Power supply unit (PSU)
375.
119.
115